R12ID7T-CHL1

R12ID7T-CHL1
Features
  • 12.1" TFT SVGA LCD

  • Intel® Atom Dual Core D2550 1.86GHz Processor

  • 1 x SO-DIMM, max. 4GB DDR3 800/1066

  • Integrated VGA, 24 bit single-channel LVDS, DVI

  • Integrated Dual Broadcom BCM57780 GbE Controller

  • 2 x SATA, 4 x COM, 8 x USB 2.0, 8 x GPIO, 1 x Mini PCIe slot

  • LCD Panel Specification

    Size12.1"
    Active Display Area246.0 (H) x 184.5 (V)
    Pixel Pitch0.3075 (H) x 0.3075 (V)
    Resolution800x600
    Contrast Ratio700:1 (typ.)
    Display Color16.2M (8bits/colors)
    Brightness450 (typ.)
    Viewing Angle-80~80 (H); -75~65 (V)
    Recommend Resolution800x600@60Hz, 75Hz
    Power InputAC 100~240 V, Universal,±10%
    Power Consumption15 W typical, normal operation
    Power ManagementVESA DPMS Compliant
    Plug PlayVESA DDC 1/2B
    Touch Sensor TypeResistive

    System Specification

    FormFactorMini-ITX
    ProcessorIntel® Atom Dual Core D2550 1.86GHz Processors
    ChipsetIntel® NM10
    Memory1 x DDR3 SO-DIMM, max.4GB
    BIOSAMI 16Mbit
    LCD SupportSingle Channel 24-bit LVDS
    EthernetDual Broadcom BCM57780 GbE Controller
    AudioRealtek ALC886 HD Audio Codec
    SATA2 x SATAII
    I/O ChipsetFintek F81865
    Serial3 x RS-232, 1 x RS-232/422/485*(2 x RS-232, 1 X RS-232/422/485* on backside I/O)
    USB8 x USB ( 4 x USB on backside I/O)
    KB / Mouse Connector2 x PS/2
    DVD OptionalNo
    Storage2.5 inch HDD
    FDD OptionalNo
    OSWindows 7
    Power AdapterDC IN 12V
    EnvironmentEnvironment & Dimensions
    TemperatureOperating : 0 deg.C to 50 deg.C
    HumidityOperating : 30% to 90% non condensing
    ShockOperating:15G, 11ms duration
    VibrationOperating: 5 Hz ~ 500 Hz/ 1 Grms/ 3 Axis Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis
    Net Weight (kg) 0.0
    Gross Weight(kg)0.0
    • *The weight information is for reference purpose.The actual weight will vary according to then options you choose,for example,the touch/glass option.

    • Note: All Specifications are subject to change without prior notice!
      *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.